企业信息

    深圳为尔康科技有限公司

  • 7
  • 公司认证: 营业执照已认证
  • 企业性质:私营企业
    成立时间:2017
  • 公司地址: 广东省 深圳市 龙岗区 南湾街道 吉厦社区 沙平北路111号608A
  • 姓名: 曾生
  • 认证: 手机未认证 身份证未认证 微信已绑定

    供应分类

    CIRS 009魔方模体,CIRS 009模体

  • 所属行业:仪器仪表 生物仪器 特殊生物仪器
  • 发布日期:2024-05-10
  • 阅读量:121
  • 价格:100.00 元/台 起
  • 产品规格:CIRS 009
  • 产品数量:1000.00 台
  • 包装说明:CIRS 009
  • 发货地址:广东深圳龙岗区南湾街道吉厦社区  
  • 关键词:CIRS,009,009模体,009魔方模体

    CIRS 009魔方模体,CIRS 009模体详细内容

    CIRS 009魔方模体,CIRS 009模体用于常规QA和IMRT应用的较方便的设备。
    
    CIRS 009魔方模体,CIRS 009模体特征:
    常规患者QA
    梁恒定性检查
    MLC QA
    用户友好的设置和定位
    适合头/颈部和躯干**
    模仿1%以内的水
    尺寸:20cm x 20cm x 20xm
    侧面垫片:0.5厘米,1厘米,2厘米
    高度垫片:0.5厘米,1厘米,2厘米
    
    CIRS 009魔方模体,CIRS 009模体原产地:美国
    CIRS 009魔方模体,CIRS 009模体适用于RT和IMRT应用中的常规QA,易于使用和快速设置非常重要。Cube 20幻像由PlasticWater?DT制造,忠实地模仿50keV至25MeV的1%以内的水。这使从CT图像采集到**剂量验证的完整QA成为可能。选择20厘米立方尺寸作为头部/颈部和躯干**的合适近似值。所有的边缘被倒圆角以避免CT伪影。
    
    室,二极管或MOSFET探测器可轻松定位在立方体的等角点,并且四面的激光对准标记便于精确定位幻影。探测器的位置可以纵向调整1毫米,横向调整5毫米。
    
    Ready-Pac胶片可以插入CIRS 009魔方模体中。通过旋转立方体,电影很*设置在矢状,冠状或横向。不锈钢基准点在CT图像上清晰可辨,并在薄膜上留下小的凹痕,以便精确的薄膜计划对位。根据要求,在接口表面可以铣削一个凹槽,用于5 x 6“的射线照相胶片的暗室加载。
     
    CIRS 009魔方模体,CIRS 009模体
    
    he CIRS Model 009 Cube 20 Phantom was designed for routine QA in RT and IMRT applications where ease of use and quick set-up are important.  The Cube 20 phantom is manufactured from Plastic Water? DT which faithfully mimics the linear attenuations of water within 1% from 50 keV to 15 MeV.  This enables complete QA from CT image acquisitions to therapy dose verifications.  The 20 cm cubic dimension was chosen as a suitable approximation for both head/neck and torso treatments.  All the edges are rounded to avoid CT artifacts.
    
    Chamber, diode or MOSFET detectors are easily positioned at isocenter of the cube and laser alignment marks on all sides facilitate precise positioning of the phantom.* Detector position can be adjusted in 1 mm increments longitudinally and 5 mm increments for lateral and elevational adjustments.
    
    Ready-Pac film can be inserted in the Cube.  By rotating the cube, the film is easily set in sagital, coronal or transverse orientations.
    
    Stainless steel fiducials are clearly resolvable on CT images and leave small indentations on the film for precise film to plan registration.  Upon request, a recess can be milled in the interface surface for darkroom loading of radiographic film 5 x 6".
    
    Routine patient QA
    
    Beam constancy checks
    
    MLC QA
    
    User friendly set-up and positioning
    
    Suitable for head/neck and torso treatments
    
    Mimics water within 1%
    SAG: CIRS 009,CIRS 009模体,CIRS 009魔方模体,Cube 20模体,Cube 20 Phantom 

    http://medicalqc88.cn.b2b168.com
    欢迎来到深圳为尔康科技有限公司网站, 具体地址是广东省深圳市龙岗区沙平北路111号608A,联系人是曾生。 主要经营电子测试测量仪器,环保环境检测仪器,彷真模体,安规测试仪,粉尘仪。 单位注册资金单位注册资金人民币 500 - 1000 万元。 我们公司主要供应美国TSI粉尘仪,美国CIRS模体,美国Gammex模体等产品,我们的产品货真价实,性能可靠,欢迎电话咨询!